Noise-based logic: Binary, multi-valued, or fuzzy, with optional superposition of logic states

A new type of deterministic (non-probabilistic) computer logic system inspired by the stochasticity of brain signals is shown. The distinct values are represented by independent stochastic processes: independent voltage (or current) noises. The orthogonality of these processes provides a natural way to construct binary or multi-valued logic circuitry with arbitrary number N of logic values by using analog circuitry. Moreover, the logic values on a single wire can be made a (weighted) superposition of the N distinct logic values. Fuzzy logic is also naturally represented by a two-component superposition within the binary case (N=2). Error propagation and accumulation are suppressed. Other relevant advantages are reduced energy dissipation and leakage current problems, and robustness against circuit noise and background noises such as 1/f, Johnson, shot and crosstalk noise. Variability problems are also non-existent because the logic value is an AC signal. A similar logic system can be built with orthogonal sinusoidal signals (different frequency or orthogonal phase) however that has an extra 1/N type slowdown compared to the noise-based logic system with increasing number of N furthermore it is less robust against time delay effects than the noise-based counterpart.     

Three‐Dimensional Polycaprolactone Hierarchical Scaffolds Supplemented with Natural Biomaterials to Enhance Mesenchymal Stem Cell Proliferation

A hybrid technology that combines a three‐dimensional (3‐D) dispensing system with an electrospinning process was used to produce a hierarchical 3‐D scaffold consisting of micro‐sized polycaprolactone (PCL) strands and micro/nano‐sized fibres. The micro/nanofibre biocomposites electrospun with PCL/small intestine submucosa (SIS) and PCL/Silk fibroin were layered between melt‐plotted micro‐strands. The scaffold containing SIS exhibited a stronger hydrophilic property than other scaffolds due to the various hydrophilic components in SIS. The 3‐D hierarchical scaffold having biocomposites exhibited an incredibly enhanced initial cell attachment and proliferation of bone marrow‐derived mesenchymal stem cells relative to the normally designed 3‐D scaffold.

     

Teleporting <Emphasis Type="Italic">N</Emphasis>-qubit unknown atomic state by utilizing the V-type three-level atom

Realizing the teleportation of quantum state, especially the teleportation of N-qubit quantum state, is of great importance in quantum information. In this paper, Raman-interaction of the V-type degenerate three-level atom and single-mode cavity field is studied by utilizing complete quantum theory. Then a new scheme for teleporting N-qubit unknown atomic state via Raman-interaction of the V-type degenerate three-level atom with a single-mode cavity field is proposed, which is based upon the complete quantum theory mentioned above.     

Ligand topology effects on olefin oxidations by bio-inspired [FeII(N2Py2)] catalysts

Linear tetradentate N2Py2 ligands can coordinate to an octahedral FeII center in three possible topologies (cis-alpha, cis-beta, and trans). While for the N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane (bpmen) complex, only the cis-alpha topology has been observed, for N,N'-bis(2-pyridylmethyl)-1,2-diaminocyclohexane (bpmcn) both cis-alpha and cis-beta isomers have been reported. To date, no facile interconversion between cis-alpha and cis-beta topologies has been observed for ironII complexes even at high temperatures. However, this work provides evidence for facile interconversion in solution of cis-alpha, cis-beta, and trans topologies for [Fe(bpmpn)X2] (bpmpn=N,N'-bis(2-pyridylmethyl)-1,3-diaminopropane; X=triflate, CH3CN) complexes. As reported previously, the catalytic behavior of cis-alpha and cis-beta isomers of [Fe(bpmcn)(OTf)2] with respect to olefin oxidation depends dramatically on the geometry adopted by the iron complex. To establish a general pattern of the catalysis/topology dependence, this work presents an extended comparison of the catalytic behavior for oxidation of olefins of a family of [Fe(N2py2)] complexes that present different topologies. 18O labeling experiments provide evidence for a complex mechanistic landscape in which several pathways should be considered. Complexes with a trans topology catalyze only non-water-assisted epoxidation. In contrast, complexes with a cis-alpha topology, such as [Fe(bpmen)X2] and [Fe(alpha-bpmcn)(OTf)2], can catalyze both epoxidation and cis-dihydroxylation through a water-assisted mechanism. Surprisingly, [Fe(bpmpn)X2] and [Fe(beta-bpmcn)(OTf)2] catalyze epoxidation via a water-assisted pathway and cis-dihydroxylation via a non-water-assisted mechanism, a result that requires two independent and distinct oxidants.     

Chemical modification of chain end in nylon 4 and improvement of its thermal stability

Two kinds of nylon 4 having an acyllactam group at one or both chain ends were synthesized by the anionic ring‐opening polymerization of 2‐pyrrolidone using N‐benzoyl‐2‐pyrrolidone (BP) or N,N′‐isophthaloylbis‐2‐pyrrolidone (IPP) and potassium tert‐butoxide as an initiator and a catalyst, respectively, and carefully isolated with the suppression of moisture adsorption. The acyllactam at one chain end in the low molecular weight of nylon 4 was quantitatively converted to other functional groups such as carboxy, amine and so on, which were confirmed by matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI TOF) mass spectroscopy. Terminal acyllactam groups telechelating in the nylon 4 at both chain ends were also modified to carboxy and amino groups. From the thermogravimetric analysis (TGA), thermal decomposition point of the modified nylon 4 was increased in comparison with that of the original acyllactam‐type nylon 4, although the acyllactam chain end caused the backbiting depolymerization accompanied with the generation of 2‐pyrrolidone monomer. The direct heating of the acyllactam‐telechelic low molecular weight of nylon 4 mixed with the diamine in bulk also led to improve its thermal stability significantly by the chain extension through the polyaddition reaction. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A target and nontarget strategy for identification or characterization of the chemical ingredients in Chinese herb preparation Shuang‐Huang‐Lian oral liquid by ultra‐performance liquid chromatography–quadrupole time‐of‐flight mass spectrometry

A target and nontarget strategy based on in‐house chemical components library was developed for rapid and comprehensive analysis of complicated components from traditional Chinese medicine preparation Shuang‐Huang‐Lian oral liquid. The sample was analyzed by ultra‐performance liquid chromatography–quadrupole time‐of‐flight mass spectrometry using generic acquisition parameters. Automated detection and data filtering were performed on the UNIFI™ software and the detected peaks were evaluated against an in‐house library. As a result, a total of 170 chemical components (110 target compounds and 60 nontarget ones) were identified or tentatively characterized, including 54 flavonoids, 30 phenylethanoid glycosides, 16 iridoid glycosides, 14 lignans, 32 organic acids, 19 triterpenoid saponins and five other types of compounds. Among them, 44 compounds were further confirmed by comparison with reference standards. It was demonstrated that this systematical approach could be successfully applied for rapid identification of multiple compounds in traditional Chinese medicine and its preparations. Furthermore, this work established the foundation for the further investigation on the metabolic fates of multiple ingredients in Shuang‐Huang‐Lian oral liquid.     

A validated UHPLC–MS/MS method for the measurement of riluzole in plasma and myocardial tissue samples

Through blocking the cardiac persistent sodium current, riluzole has the potential to prevent myocardial damage post cardiac bypass surgery. A sensitive UHPLC–MS/MS method was developed and validated for quantitation of riluzole and 5‐methoxypsoralen in human plasma and myocardial tissue homogenate using a liquid–liquid extraction with dichloromethane. The chromatographic separation was achieved using Shimadzu Shim‐pack XR‐ODS III, 2.0 × 50 mm, 1.6 μm column with a gradient mobile phase comprising methanol and ammonium acetate buffer pH 3.6 in purified water. The analyte and internal standard were separated within 3.5 min. Riluzole quantitation was achieved using the mass transitions of 235–138 for riluzole and 217–156 for 5‐methoxypsoralen. The method was linear for riluzole plasma concentrations from 0.2 to 500 ng/mL and myocardial tissue homogenate concentrations from 0.2 to 100 ng/mL. The method developed was successfully applied to a clinical study for patients receiving riluzole while undergoing cardiac bypass surgery.     

Determination of Cefalothin and Cefazolin in Human Plasma,Urine and Peritoneal Dialysate by UHPLC‐MS/MS: application to a pilot pharmacokinetic study in humans

An ultra‐high‐performance liquid chromatography–tandem mass spectrometry (UHPLC‐MS/MS) method for the analysis of cefazolin and cefalothin in human plasma (total and unbound), urine and peritoneal dialysate has been developed and validated. Total plasma concentrations are measured following protein precipitation and are suitable for the concentration range of 1–500 µg/mL. Unbound concentrations are measured from ultra‐filtered plasma acquired using Centrifree^® devices and are suitable for the concentration range of 0.1–500 µg/mL for cefazolin and 1–500 µg/mL for cefalothin. The urine method is suitable for a concentration range of 0.1–20 mg/mL for cefazolin and 0.2–20 mg/mL for cefalothin. Peritoneal dialysate concentrations are measured using direct injection, and are suitable for the concentration range of 0.2–100 µg/mL for both cefazolin and cefalothin. The cefazolin and cefalothin plasma (total and unbound), urine and peritoneal dialysate results are reported for recovery, inter‐assay precision and accuracy, and the lower limit of quantification, linearity, stability and matrix effects, with all results meeting acceptance criteria. The method was used successfully in a pilot pharmacokinetic study with patients with peritoneal dialysis‐associated peritonitis, receiving either intraperitoneal cefazolin or cefalothin. Copyright © 2015 John Wiley & Sons, Ltd.     

Biologically sustainable rubber resin and rubber‐filler promoter: a precursor study

Enthused by the ever growing demand for sustainable and green based materials in responding to applications based on macromolecules, an attempt was made in seeking a bio‐resin (Terpene). Herein, we report the functionalization of bio‐resin with natural rubber (NR) to produce new sustainable and greener functional polymer. Bio‐resin functionalized NR was prepared by melt mixing using di(2‐tert butyl peroxy isopropyl) benzene initiator. Structure elucidation of the bio‐resin functionalized NR was established by proton nuclear magnetic resonance and Fourier transform infrared spectroscopy, respectively. Bio‐resin functionalized NR facilitates the augmented interaction with highly dispersible silica. Amended state of highly dispersible silica dispersion has been achieved in the absence of toxic process oil, expensive silane coupling agent and conventionally used zinc oxide. Remarkable improvement in overall properties corroborated with various meticulous characterization including nanoindentation, rheological, physico‐mechanical and small angle X‐ray scattering using Becauge model, etc. The dynamic mechanical properties of the greener polymer demonstrated low rolling resistance coupled with high traction. More decisively, the macromolecule system toned up sparingly in the presence of the bio‐resin. Our contribution facilitates a novel avenue to develop sustainable high‐performance elastomeric macromolecule. Copyright © 2017 John Wiley & Sons, Ltd.